Tag: holley

LS Swapping Your 67-72 C10 Has Never Been Easier!

LS Swapping Your 67-72 C10 Has Never Been Easier!

Holley is pleased to announce the release of new LS swap components for 1967-1972 Chevy C10 Pickups – Hooker Blackheart has released a full lineup of parts for 1967-72 C10 Pickups allowing for a bolt-in LS swap conversion! The new engine mounts will replace your existing stools and allow for use of OE 4th-gen F-body […]

March 29, 2020 More
Superchips Adds 70HP to 17-19 SHO Ford Taurus

Superchips Adds 70HP to 17-19 SHO Ford Taurus

We are excited to announce new tuning coverage for the 2017-2019 Ford SHO Taurus with 3.5L Ecoboost (Dashpaq+ p/n 10601). Superchips is the industry leader in hand held performance tuning and we’re backing that up with impressive tuning for the SHO with up to 70 horsepower gains! We included three tune options built specifically for […]

March 29, 2020 More
HOW TO SET DISTRIBUTOR TIMING

HOW TO SET DISTRIBUTOR TIMING

Setting the ignition timing advance on an engine with a distributor style ignition system can be confusing if you don’t know what you’re looking at. Thankfully, Jeremy is here with all of the facts on setting the timing on most any old-school distributor-ignition system.   Read more stories like this at www.rpmmag.com Subscribe to RPM […]

March 28, 2020 More
Video: Holley EFI Controls This 10,000 RPM LSX Monster!

Video: Holley EFI Controls This 10,000 RPM LSX Monster!

Donut Media had the opportunity to catch up with Riley Stair and learn about his INSANE Pontiac Trans Am. Fabricating all of the inboard suspension and tube chassis by himself, Riley stuffed a 440″ LSX engine that is capable of revving to 10,000 RPM! Controlling all of that fun is a Holley EFI system and […]

March 28, 2020 More
NMRA/NMCA (ProMedia Events & Publishing) Office Goes Remote due to COVID-19

NMRA/NMCA (ProMedia Events & Publishing) Office Goes Remote due to COVID-19

Due to California state regulations during the COVID-19/Coronavirus Pandemic the office of ProMedia Publishing & Events, parent company of the Holley NMRA Ford Nationals and NMCA Muscle Cars Nationals has gone to a work-from-home status for the foreseeable future to keep our office staff safe. Despite the office closure, the NMRA/NMCA staff remains operational, but will […]

March 25, 2020 More
NMRA/NMCA All-Star Nationals Postponed Due to Coronavirus Pandemic

NMRA/NMCA All-Star Nationals Postponed Due to Coronavirus Pandemic

ProMedia Events and Publishing, parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, in association with Atlanta Dragway’s parent company NHRA, have decided to postpone the NMRA/NMCA All-Star Nationals in response to growing restrictions on group gatherings and travel due to the Coronavirus pandemic. Effective today the NHRA has suspended all […]

March 16, 2020 More
Holley News: HAYS Releases New SFI Flywheels for Gen 3 Hemi & Ford Modular Applications!

Holley News: HAYS Releases New SFI Flywheels for Gen 3 Hemi & Ford Modular Applications!

Holley is pleased to announce the release of four new SFI certified Billet Aluminum Flywheels – HAYS has expanded their already extensive flywheel lineup with four new SFI certified offerings. These CAD designed pieces are intended for use in late model applications including 09-17 Dodge Challenger’s w/ 5.7L, 6.1L or 6.4L Hemi’s ; 12-13 Mustang’s […]

March 16, 2020 More
Holley Makes Setting Up Your T-56 Clutch A Breeze!

Holley Makes Setting Up Your T-56 Clutch A Breeze!

Holley is pleased to announce the release of five new products for hydraulic clutch assemblies in T-56 transmission applications – Their upgraded design of the ’98-’02 Camaro/Firebird master cylinder ensures that your pedal throw will be consistent and not exhibit any dreaded binding. A reservoir for the new master cylinder has also been designed, making […]

March 15, 2020 More
Announcing Holley iNTECH Intakes for JEEP Wrangler JK and EcoBoost Mustang

Announcing Holley iNTECH Intakes for JEEP Wrangler JK and EcoBoost Mustang

Holley is pleased to announce the release of new cold air intakes for 2012-2018 Jeep Wrangler JK 3.6L Models and 2015-2020 Ford Mustang 2.3L Ecoboost Models. Utilizing Holley iNTECH’s unique, patented Slip-Seal housing-filter-tube interface, these systems eliminate the use of hose clamps and adapters for a seamless installation. iNTECH systems deliver optimum performance with a […]

March 14, 2020 More
Still The One – John Caruso

Still The One – John Caruso

Islip, New York resident John Caruso isn’t the kind of guy to make a hasty decision. After all, the owner of New Apple Automotive Warehouse first purchased this lightning-quick 1961 Corvette as a gutted-out roller for the paltry sum of $2,000 all the way back in 1976. While nearly every aspect of the car, including […]

March 13, 2020 More
HyperKinetic Wheels – New for 2020!

HyperKinetic Wheels – New for 2020!

Holley is pleased to announce the launch of a new brand for 2020 – HyperKinetic wheels stemmed from a need for a wheel line that focuses on delivering affordable, quality products without sacrificing good looks. Available in both small GM and Ford/Mopar patterns, these 17″ Magnum wheels are the perfect upgrade for your next project! […]

March 11, 2020 More
Snow Performance Water/Methanol Injection System for Holley  Hi-Ram EFI Manifolds Now Available at Summit Racing

Snow Performance Water/Methanol Injection System for Holley Hi-Ram EFI Manifolds Now Available at Summit Racing

Have a Holley Hi-Ram EFI intake manifold on your turbo- or supercharged GM LS/LT1 or small block Ford? Add this Snow Performance Water/Methanol Injection System and pump in more cold, dense, horsepower-building air. Snow Performance says the system can decrease incoming air temperatures by up to 100 degrees F and unleash an extra 50 to […]

March 4, 2020 More
New Holley EFI Harness Adapters & Milspec Ignition Harnesses For GM LS!

New Holley EFI Harness Adapters & Milspec Ignition Harnesses For GM LS!

Holley is pleased to announce the release of new accessories for Holley EFI systems – Their new MILSPEC EV1 injector harness is made with high quality Raychem DR-25 heatshrink tubing and is designed to thrive in the harshest of environments. The MAP sensor adapters make upgrading to a stainless steel sensor a true plug and […]

February 29, 2020 More
Holley News: Flowtech Expands Derby Header Lineup

Holley News: Flowtech Expands Derby Header Lineup

Holley is pleased to announce the release of new upright headers from Flowtech! Flowtech upright headers feature CNC mandrel-bent primary tubes that provide consistent tubing diameters for smooth flow of the exhaust pulse and increase the cylinder scavenging of the exhaust to improve engine breathing. The primary tubes are constructed from heavy duty 16-gauge 409SS […]

February 27, 2020 More
Holley News: New Flowmaster American Thunder Exhausts for Ram & Silverado

Holley News: New Flowmaster American Thunder Exhausts for Ram & Silverado

Holley is pleased to announce the release of two new cat-back exhaust systems for late model pickups. Flowmaster’s American Thunder series exhaust uses Delta Flow technology to increase performance and deliver a deep, powerful sound. Their new exhaust lineup is designed for 2014-2019 RAM 3500 models with the 6.4L Hemi engine. Flowmaster has also expanded […]

February 25, 2020 More
Sniper EFI Grows In-Tank Pump Lineup!

Sniper EFI Grows In-Tank Pump Lineup!

Holley is pleased to announce the expansion of its in-tank fuel pump assembly systems for popular muscle cars and trucks. Four new “Muscle Car EFI Modules” covering various GM and Mopar models and two new replacement fuel tanks for 73-87 GM Blazer / Jimmy / Suburban are now available. Muscle Car EFI ModulesConverting your ride […]

February 7, 2020 More
Holley EFI Powers Tom Bailey to First 5-Second Pass in Drag Week History!

Holley EFI Powers Tom Bailey to First 5-Second Pass in Drag Week History!

What could arguably be the last great milestone in street car drag racing was achieved two weeks ago as Tom Bailey went a 5.998 @ over 250 mph on the final day of Drag Week 2019.

September 27, 2019 More
Holley EFI Propels Tom Bailey to Drag Week Victory

Holley EFI Propels Tom Bailey to Drag Week Victory

Hot Rod Drag Week is a very special stratosphere of drag racing, reserved for only the toughest and craziest drag racers in the world. It takes a special blend of mettle, perseverance, ingenuity, and flat out mechanical and driving ability to complete the entire week in any of the classes. It goes without saying that […]

October 8, 2015 More
Holley Announces Sponsorship of the NCM Motorsports Park Control Tower

Holley Announces Sponsorship of the NCM Motorsports Park Control Tower

Holley Performance is proud to announce a new partnership with the NCM (National Corvette Museum) Motorsports Park, and is sponsoring the Park’s Control Tower and Event Center in Bowling Green, KY. “It is only fitting that two great American motorsport brands like Corvette and Holley unite with our sponsorship of the NCM Motorsports Park,” said […]

July 28, 2014 More
Hooker Super Competition Header $25 Rebate

Hooker Super Competition Header $25 Rebate

Spring has sprung! That means hot rodders are coming out of hibernation. They’re dusting off their rides and are ready to step up the pace on their project vehicles. What better way to improve power and looks than to add a set of Hooker Super Competition Headers! Hooker Headers is proud to announce the Super […]

April 8, 2014 More
SITEMAP